News

Some notes on operating the sheet metal cutting machine

Hydraulic shearing machine or hydraulic shearing machine is one of the most used cutting machines in civil construction in general because of its convenience and high precision. Operating the sheet metal cutting machine is not difficult, and bring high performance for work. However, to work smoothly, we first learn about the principle of the hydraulic system of the cutting machine.
 
Some notes on operating the sheet metal cutting machine
 
Hydraulic shearing machine or hydraulic shearing machine is one of the most used cutting machines in civil construction in general because of its convenience and high precision. Operating the sheet metal cutting machine is not difficult, and bring high performance for work. However, to work smoothly, we first learn about the principle of the hydraulic system of the cutting machine.
 

The system consists of the following parts: pressure control valves, magnetic valves and rotary valves, non-reversing valves and gear pumps. The oil pump will provide the oil pressure used in the hydraulic system, in addition the working pressure of the machine is adjusted by different valves.
Some notes on operating the sheet metal cutting machine
 
In order to cut corrugated sheeting, it is necessary to adjust the die cutting machine according to the formulas available in the manufacturer's instruction manual. Because of the vibration thickness of the sheet is usually cut in the range of 0.5 - 6mm, in addition, the pressure of the blade when the contact sheet is about 450 N / mm square should assume the plate thickness Thicker or thicker than usual, we need to recalculate the cutting edge angle so that the cutting machine works best and does not malfunction during use.
 
The opening of the blade, thanks to the flexibility of the blade joint, should be adjusted through a few quick and easy operations. Note that the cutting machine includes a scaling system. It is in the front of the dividers and at the back of the meter (on the side of the control system). There is a handle to regulate the clearance of the blade, along with an open index and displayed on the counter.
 

OTHERS