News
Principles of occupational safety in the mechanical industry
I. Concepts
1. Concept of mechanical processing
Metal cold working is often called mechanical processing. In mechanical processing, the parts are manufactured by the method of cutting off the excess processing to achieve the correct size and gloss according to the technical requirements.
When working, occupational accidents and diseases can occur more or less depending on the type of machine and equipment, the layout of the machine, the layout of the workplace, the way of ventilation and lighting, and depending on the type of machine. degree of mechanization and automation.
In this document, we will introduce the general requirements for occupational safety in the mechanical industry and specific technical safety requirements and measures for some typical and common machines and equipment in the mechanical engineering industry of Vietnam. our country today.

2. Definition of mechanical hazards
A mechanical hazard is a place and source of danger due to the shape, size, and movement of working means, aids, transport vehicles as well as workpieces that cause injury to the human body. workers in the production process such as clamping, cutting, chopping, rolling, pulling, penetrating, impacting...
The degree of injury (or harm) of a mechanical hazard depends on the energy of the impacting system (such as that of the machine of the equipment…) and the impact energy of the person (the movement of the hands, of the body). possible) and also to assess the impact of the hazard.
II. Accidents and common causes
1. Accident
In mechanical processing, the accidents that often occur can be divided into the following categories:
- Stumbled
- Collapse, impact
- Chip burns
- Shockwave
- Piercing
- Clothes and hair are caught in the machine
- Rolling, clamping, cutting machines
- Shot in the eye
2. Cause
Causes of accidents:
- Shielding device is not safe
- The insurance device is missing or the insurance device is damaged or not working correctly
- The machine control part is broken
Violation of standards, regulations, and procedures for safe machine use
- Violation of factory safety rules
- Poor hygiene conditions such as: lack of light, poor ventilation, noise exceeding the allowable standards
- The factory floor is messy, the traffic in the workshop is not convenient
- Arrange raw materials, finished products / semi-finished products in a neat and orderly manner

III. Principles to ensure occupational safety for users, operators, and repairs in mechanics
1. General principles
To fully comply with the requirements on occupational safety and health as prescribed in current regulations from the design, manufacture, installation, use and management of machines and equipment according to technical regulations and standards of safety. specifications and requirements in the manufacturer's machine profile;Specific identification of hazardous areas and risks of occupational accidents in the process of using machinery and equipment;
Take adequate and appropriate safety measures;
The organization of the premises of the workshop must be suitable for the safety conditions:
- Choose the right location and location
- Reasonable arrangement of workshops, warehouses and transportation routes to ensure reasonable and convenient;
- Install equipment in the workshop to ensure safe conditions;
2. Principles of safety when using machines and equipment
- No one is allowed to start the machine except the person in charge
- Before starting the machine, check the safety device and standing position
- Before going to other work, you must turn off the machine, do not let the machine operate when there is no operator
- Need to turn off the power switch when there is a power failure
- When you want to adjust the machine, you must turn off the engine and wait until the machine comes to a complete stop, do not use your hands or sticks to stop the machine.
- When operating the machine, must wear appropriate personal protective equipment (do not wear too long clothes, do not wear scarves, gloves, etc.)
- Check the machine regularly and check before operating
- On the broken machine, it is necessary to hang a sign saying "Damaged machine"
3. Notes to make the machine safer, more productive
- Choose to buy machinery that all operations are safe;
- Fully covered moving parts;
- There is an automatic device to stop or control it with two hands at the control range;
- Use safe material loading and unloading devices to increase productivity and reduce machine hazards;
- Fully cover the parts and dangerous areas of the machine. The guard should must:
+ Firmly fixed to the machine;
+ Cover the moving part of the machine;
+ Do not obstruct the operation of the machine and the view of workers;
+ Can be disassembled when need to maintain the machine;
+ Maintain the machine properly and regularly;
+ Use appropriate personal protective equipment;
+ The system of warning signs for dangerous places and dangerous areas is adequate;
+ Ensure safe electrical system;
+ Fully implement fire prevention and fighting measures.
In particular, the employees themselves need to know the knowledge and have a sense of occupational safety for themselves and the collective.














